|
|
 |
Card vibro Air
Users feel the vibration meters have too many settings. Generally, acceleration, velocity, displacementamplitude and mode as RMS/PEAK should be set before the measurement. CardVibro Neo can measure these simultaneously. Multiple data can be collected by 1-time measurement.
General Specifications | Item | Specifications | | Suitable PC | Pocket PC or PC with built-in wireless LAN | | Suitable Standard of Wireless LAN | IEEE-802,11g, 11n | | Power supply | Rechagreable Built-in Battery | | Temperature Range Humidity Range | 045℃ 3090% RH not due condensation | | Weight | 200g approx. It contains it a standard pickup and 2 size AAA batteries. | | Dimensions | 55.6×44×118mm | | Interface for Pickup Input | HA10Acircular Connector 6-pin) | | Waveform Output | nil | | Sampling Frequency | MAX. 76.8kHzChanges according to Mode. 76.8kHz38.4kHz19.2kHz9.6kHz | | Aliasing Filter | 20kHz/2kHzChanges according to Mode. | | A/D | 16bit | | Available Language | Japanese,English,Chinese,Korean Please Prepare the Pocket PC or PC at your side, except Japanese. | | Communication Method | ad hoc Mode The data communication is done by couple 1 without the router. | |
| |
Measurement Specifications | Item | Specifications | | Overall Measurement | Select Simultaneous Meas.Single Meas. | | Judgment | ISO Vibration EvaluationISO-10816JIS-B-0906standard
Bearing Evaluation | | FFT Spectrum Analysis | ○Lines of ResolutionMax. 1600lines
Trigger function
Dominant frequency component of highest 5 display function | | Time Waveform Measurement | Measuring TimeMax. 10 second
Trigger function | | Notes function | Memo for every Machine,Measuring Point can be recorded. Data of rotational number, temperature, power,
pressure etc other than vibration can be saved. | | Data Save Control | Saves the information of machine name, measuring point,
detected direction, note, measuring data, measuring
condition etc in addition to the measured data.
○Pocket PCmemory 64MBcan save OA:2000 points, FFT:1000 points, WV:5MB
with the use of external memory as SD card, more data can be saved. |
Overall Vibration MeasurementUsers feel the vibration meters have too many settings. Generally, acceleration, velocity, displacement（amplitude）and mode as RMS/PEAK should be set before the measurement. CardVibro Neo can measure these simultaneously. Multiple data can be collected by 1-time measurement. Simultaneous measurement Of Multiple data High Resolution Of 1600lie Records the wave From Up to 10sec Check by ear Available For Any measurement With Exchange of sensor
|
© I Adept Marketing. All Rights Reserved (Terms of Use)
