I Adept Marketing
I Adept Marketing
I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing I Adept Marketing
Home » Vibration Analyzers / Data Collector

Vibration Analyzers / Data Collector



ROZH has developed a new generation integrated spot inspector RH711 to meet the increasing demand of network equipment condition monitoring and faults diagnosis, used for daily spot inspection.

The 795M is an economical portable single channel multi-function data collector with FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ-multi-plane balancing of rotating machinery (up to 8 planes of correction, up to16 point to check vibration)

Universal vibration meter that measurement of Velocity, Acceleration, Displacement. FFT spectrum up to 800 lines resolution.

Features
�¡Intuitive operation with Windows interface
�¡Clear presentation of results on very large colour LCD
�¡Very wide speed range up to 300,000 RPM
�¡Systematic detection of damage through envelope analysis

Functions
�¡Unbalance measurement in one or two planes
�¡Conversion of unbalance correction into practical balancing methods (e.g. drilling)
�¡Frequency analysis to determine the spectral components of a vibration
�¡Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
�¡Envelope analysis to detect damage of rolling bearings or gears
�¡USB port to transmit the measurement values to a PC
�¡Offline PC software

Applications
�¡Measuring vibrations on bearings and machine housings
�¡Field balancing on site
�¡Recording the condition of rolling bearings
�¡Observing and recording vibration levels
�¡Identifying frequencies in a vibration
�¡Detecting resonance points and identifying transfer functions
�¡Detecting machine damage

more...
I Adept Marketing Economical Single Channel Vibration Analyzers Data Collector



Card Vibro Neo Vm- 2004 Neo has built in digital amplifier. It is provided with a card size remote control unit. The system provides multiple setting for acceleration, velocity etc.

A simple to use, cost effective full condition based maintenance (CBM) system including full asset management.

Users feel the vibration meters have too many settings. Generally, acceleration, velocity, displacementamplitude and mode as RMS/PEAK should be set before the measurement. CardVibro Neo can measure these simultaneously.

more...
I Adept Marketing PDA Based Single Channel Vibration Analyzers Data Collector



Unbalance after correction: The vibration value measured is the trial weight or correction weight added, remnants unbalance is used to measure remnants unbalance, trial weight is used to eliminate initial unbalance, correction weight is used

Fieldpaq is high speed floating pointer DSP chip, powered by MS WinCE. A new standard for advanced sound and vibration test.

RH802 Spectrum analyzer is portable but powerful vibration spectrum analyzer developed by very experienced expert and mechanical maintenance expert. Offers some characteristics function, such as long time domain waveform

more...
I Adept Marketing 2 channel Realtime Vibration Analyzers Data Collector Balancer



Compact Flash Card and USB port protected by the water proof cover

Novian is asoftware package that turns your data acquisition hardware into a powerful 4-32 channel

Soundbook™, our universal portable measuring system for acoustic, vibration and engineering measurements in general, is now available in its 2nd generation on the basis of the innovative Apollo™ platform.

more...
I Adept Marketing Four Eight Channel Realtime Vibration Analyzers Data Collector Balancer



MSX16 is a flexible and expandable multi-channel data acquisition and signal processing unit for applications in research, development and testing.

universal portable measuring system for acoustics and vibration

more...
I Adept Marketing Multi Channel Laptop Based Vibration Analyzers Data Collector



Rotor Balance Analyzers is a software, which is extremely easy to use. It allows easy connection with laptops and printers.

BAL-2000 is a portable, USB-powered balancing system for Windows desktop and laptop computers. This system is provided with one or two ICP®-compatible accelerometers.

The MinIbalancer MI 2100 is the state-of-the-art field balancing instrument for balancing rotating machinery in one or two planes under operating conditions.

Built--in ISO quality grade levels and RPM measurement in ISO quality grade levels and RPM measurement

The Tribalancer is a self contained instrument designed specifically for machines with three permanently mounted balancing weights.

more...
I Adept Marketing Dynamic Balancer with or without Analyzers


Our Exclusive Services
Home | About Us | Clientele | Distributors Wanted | Contact Us | Enquiry