8 Channel Datalogger Acquisition System

Tenor: 8 - CH Datalogger Acquisition System
The Tenor Data Logger is an 8-channel data system that provides accurate measurement of acoustic and vibration. It is based on the principle of Digital Signal Processing (DSP) and allows accomplishment and storage 8 channels on a PC. For this process, it uses high speed USB 2 link.

Hardware Technical Data

» Sampling rate up to 43 kHz per channel for 8 channels » SNR: 85 dB (input) and 88 dB (output) » Dynamic range: 110 dB » 4 input types: Direct DC, Direct AC, ICP and Electret » Input dynamic range (+/-25 mV to +/-5 V) » 8 independent programmable analog outputs with LED status » Output dynamic range (+/-2V) » Anti-aliasing filter on outputs and inputs » BNC connector with LED status for each input and ouput » 24Volt-0,5A External AC/DC power supply included » Dimensions (WxHxD): 77 x 217 x 274 mm (3 x 8 1/2 x 10 3/4 inches) » Weight: 2.4 kg (5.2 lbs)

Software Technical Data

»Data-logging in a standard .wav file format » Sensor calibration module and management of a sensor bank » Real time dynamic and saturation monitoring of 8 input channels » Real time monitoring of input and output signals (time signal, global levels historic and average Sxx) » Complete post-processing module » Wave file generation module

Laser Doppler Vibrometer

The New Laser Doppler Vibrometer has a red laser diode for aiming the infrared laser diode measuring beam. This system is a compact, competitively priced, and easy-to-use precision instrument for non-destructive testing and non-contact vibration measurement of any surface. It is optimized for measuring distances from one centimeter to five meters, so there is no need for adjustments, lens accessories, or object treatment, thus ensuring the highest level of measurement accuracy.
New Red Visible Laser Diode for Easy Viewing Point and Measure Operation Compact, Robust, Field-Tested Design No Beam Focusing or Surface Treatment Required Heterodyne Detection for High Measurement Sensitivity 12-Month Warranty

Wireless accelerometer based monitoring system

Features

» Piezoelectric Sensor, 0.35 Hz to 10,000 Hz » Response Selectable ± 5 or ± 50 g's full scale range » Single Axis Sample Rate up to 40 KHz Sample » Count up to 65,000 » Standard Temperature: -5º F to 125º F » 2.5” x 1.5” diameter Battery life >1.5 years when taking an 800 line FFT once per hour 250 ft. line of sight distance between NAP and Sensor (Wireless Repeater can extend distance or coverage)

A Standard Kit contains

» Five Standard Temperature Wireless Accelerometers » Five Standard Temperature Batteries » One Wireless Network Access Point » Software » One Ethernet Crossover Cable » One Installation Manual

Compact WCA AD-3651

From in-vehicle order tracking to MIMO analysis In-vehicle Real-time Noise & Vibration Analyzer

» Compact-True ISO A4 Size (210 x 297mm) » 24-bit ADC » Real-time Octave Analysis » Throughput Acquisition to Disk (standard) » Powered by DC, AC or Backup Battery » Dynamic Range 100dB » Multi Taco Input » Multi-Input Multi-Output (MIMO) Analysis (standard)