|Application||Industrial Use, Laboratory Use|
Take a photo, do the measurements and get the MCP (Machine Condition Picture) to see the machine condition, if maintenance needed at a glance. Quick, easy to use, with automatic auto diagnosis system for beginners and experts.
The VSHOOTER is a comprehensive diagnostic tool a vibrometer that allows to know and to easily track the status of the more common rotating machines such as fans, pumps, screw compressors etc …
The VSHOOTER VBS1T produces the MCP. The VSHOOTER VBS1T is a portable measuring device, a vibrometer equiped with an external high quality accelerometer, an embedded camera, led stroboscope and pyrometer. A special software has been developped to get photos enhanced with informations. On every MCP appear the measuring points locations. The points appear in green, yellow, orange or red according to the classification of ISO 10816-3 7
|The vibrations of newly installed machines are normally placed in green zone.|
|The machines whose vibrations are within yellow zone are normally considered acceptable for a long service life without any restrictions.|
|Machines whose vibrations are in orange zone are normally considered unsuitable for long-term continuous service. In general, the machine can operate in these conditions for a limited time, until the opportunity arises to take corrective action where necessary.|
|The vibration values found in red area are normally considered significant enough to cause damage.|
Every MCP, condition picture, with all the vibration measurements related to can be stored in the memory of the VSHOOTER. Up to 1000 MCP can be stored and uploaded to a PC by mean of the USB cable supplied.
For measurements values within zone orange and red the V SHOOTER VBS1T automatically performs a self diagnosis and the FFT of the Velocity and the Acceleration. On the FFT screens the user is directed automaticaly to one of the 5 most common defects (75% of faults): unbalance, bearing shock and lubrication, alignment, foundation. In case of none of these defects being detected it is recommended to use a more power full analyzer.
On clicking on the table of all the measurements made on a machine will be displayed:
On clicking on the FFT of the Velocity and Acceleration of all the measurements on alarm, orange and red according to ISO 10816-3 7, will be displayed. For the Velocity the 3 frequencies with the largest amplitude will also be displayed together with the self diagnosis.
The VSHOOTER VBS1T has two operating modes : FUSION and MULTIMETER.