Microprocessor Vibration Meter,Microprocessor Based Vibration Meter,Microprocessor Vibration Meter Supplier,India

vPod

Powered by microprocessors, vPod is the brand of new vibration sensors that can easily measure acceleration, velocity & bearing conditions and display them with user selectable unit/detection. This instrument is widely used for testing of different high-end machines and equipment. The hi-tech sensors is available with advanced features to facilitate quick connection and accurate measurements in any environment . High resolution graphic LCD display makes the reading even more clearer. V pods provide perfect handling with ease of operation for testing and diagnosis of machines.

The family of vPod meters are available in different models including vPod II & vPod Lite. The vPod II meter can store up to 1000 sets of vibration data. These saved data points can be recalled by entering the meter's review. It supports both vibration and temperature data. vPod II can also be connected to an optional thermometer for collecting mode.

Whereas, vPod Lite meters are advanced model that can easily measure average, hold or peak hold vibration data. It is suitable for those precision machines that have very low vibration levels. The built in gain of the Vpod amplifies small signals and show the reading in precision mode.

Powered by the microprocessor this meter can easily measure average, hold or peak hold vibration data, and display them with user selectable unit/detection. The battery charge indicator and sensor bias indicator is also a standard feature of vPod and vPod ll. vPod ll has built-in memory for storing up 1000 archive data points. It can transfer data through the RS-232C port with a PC.

For those precision machines that have very low vibration levels, a precision reading is necessary. In addition to an extra quiet accelerometer that is supplied as a standard accessory incorporate a built-in gain circuit to amplify small vibration signals and show the reading in precision mode when you turn the gain mode on. This one button gain function allows the user to increase precision by one decimal place.

The vPod can measure vibration levels in acceleration, velocity or displacement. The users can select to display the vibration results in their preferable units and detections. The vPod come standard with a built-in 500 Hz high pass filter. The is significant because most roller element bearings' parts are located between 500 Hz - 2 kHz. This high pass filter method has been proven to be very useful in identifying a bearing condition.

With the incorporation of built-in EEPROM memory, a vPod ll meter can store up to 1000 sets of vibration data. These saved data points can be recalled by entering the meter's REVIEW mode. Every vPod ll comes with an RS-232C interface program for downloading the saved data from memory to a PC for post analysis or report building.

The Trendex software supports both vibration and temperature data. In the route data collection mode, vPod ll also can connect to an optional thermo meter for collecting temperature data.

Send Enquiry

The vPod ll can download a pre-defined measurement route for mass data collection

The built-in review mode of the vPod ll shows the stored data

The patented G-Spike™ enables you to quickly connect to the detection probe

SMD (surface mount) production

Battery charge indicator

Input bias indicator

Backlit, high resolution LCD display

Average, peak hold and freeze modes

Selectable gain

Memory for storing up to 1,000 data

Review data mode

RS-232C interface

Route-Based collection

Send Enquiry

vPod | vPod Lite | vPodII