Vibration Meter

Product Price :Get Latest Price

Product BrochureProduct Details:

9071 is a simple, easy to use, low cost vibration meter. Record, analyse and display vibration signals at the push of a button.

Benefits:

• Built-in ISO Alarms
• Find machine faults before they stop your machine
• Increase productivity and lower maintenance costs

Features:

• Full Color LED Display
• Collect data
• Standard Cable mounted accelerometer with magnet
• ISO built-in Alarms
• Easily identify bearing problems with BDU Reading
• Easily identify problems with built-in band filters: a) 1X (unbalance) b) 2X (misalignment) c) 3X (looseness)
• 800 line FFT (spectrum)
• Ruggedized IP67 case

9071 analyzes interprets readings: ISO machine alarms and BDU reading indicate overall machine and bearing condition; clear picture of machine problems detects imbalance, misalignment and looseness; 800-line spectrum with zoom and cursor to identify complex issues.

Collect and store test data. Storage space of 10 memory blocks with 20 readings per block available. Stored readings can be displayed for analysis.

Product Price :Get Latest Price

Product BrochureProduct Details:

This vibration meter allows you to conduct vibration analysis at the touch of a button. The economical and easy-to-use meter displays color coded alarm levels for ISO values and bearing damage (BDU) on the full color OLED display; green (good), yellow (caution), and red (stop).
Easily identify, bearing, balance, and alignment problems

• ISO built-in alarms
• Easily identify bearing problems with BDU reading
• Built in band filters detect equipment problems:
• 1X (unbalance), 2X (misalignment), 3X (looseness)
• View complex issues with the 800-line spectrum with zoom and cursor
• Ruggedized IP67 design
• Trend data with included C-trend Lite software
• Standard cable mounded accelerometer with magnet
• Built in Bluetooth™ communication capability
• USB docking station to download to a PC
• Easily collect and store data

Product Price :Get Latest Price

Product BrochureProduct Details:

9070 Smart Vibration Analyzer. Vibration analysis at the touch of a button. Analyse and Interpret readings; incredible performance at an unbelievably low price. Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

Benefits:

• ISO Built-in Alarms
• Easily identify bearing problems with BDU Reading
• 800 line FFT (spectrum)
• Ruggedized IP67 case

The 9070 is a simple to use vibration monitoring and analysis tool that allows easy display of vibration signals. The meter automatically per-forms vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness.

Features:

• Full Color OLED Display
• Easily identify problems with built in band filters:
  1X (unbalance)
  2X (misalignment)
  3X (looseness)
• Built-in accelerometer with stinger. Optional long stinger and magnetic mount available

Product Price :Get Latest Price

Product Details:

HAV Meter Starter System can collect data from the base station which is then analysed and reports generated covering the tool usage, an employees vibration exposure levels. The Toolminder software can also be used to track tools, asset management, task management and employee shift durations. Since the introduction of the Control of Vibration at Work Regulations (2005) it has become essential for all companies to ensure their workers are not exposed to dangerous levels of vibration. The HAV meter system is ideal for any company who needs to comply with the Control of Vibration at Work Regulations (2005)

Product Price :Get Latest Price

Product Details:

Application

• Versatile tool for vibration measurement during product development and for health and safety at the workplace
• Measurement of hand-transmitted vibration to ISO 5349
• Measuerement of whole-body vibration to ISO 2631
• Vibrations on passenger and merchant ships to ISO 6954
• Vibration dosemeter
• Condition monitoring of rotating machinery
• Measurements at roller bearings
• Vibration measurement in vehicles and other vibrating structures

Product Price :Get Latest Price

Product BrochureProduct Details:

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement. The Vibration Meter not only shows the effective value but also the peak value and crest factor. The Vibration Meter delivers detailed information on the current state as well as past history of the measurement values due to a spectral analysis and a tendency prognosis. Measured data can be transferred to a computer via a USB connection in order to evaluate it there in an optionally purchasable software. This allows long-term measurements to be recorded and reviewed in detail. Even if the data is not transferred, the Vibration Meter has enough data storage capacity to save 16,000 measured values internally. There is also the option of purchasing VMID measurement slots.

• Graphic diagram of tendency
• Output for headphones
• Multiple languages 
• OLED display 
• Automatic. recognition of measuring location due to sensor foot
• Pocket design

Product Price :Get Latest Price

Product Details:

The Examiner 1000 is designed for ease-of-use in condition-based maintenance programs. It is the ideal tool to begin a Predictive Maintenance Program or to add into an existing World-Class Maintenance Program with FFT data collectors and Analysis Software.

Examiner measures vibration in:

• Acceleration
• Velocity
• Acceleration Enveloping

 

Product Price :Get Latest Price

Product BrochureProduct Details:

Features:

• Tri-axial Hand Arm vibration Measurements
• Large Dynamic Range
• Re-chargeable Battery Pack & Charger
• Fully compliant with ISO 8041 : 2005
• Large Colour Display
• Large ‘Flash’ memory
• Rugged Accelerometer and Cable for industry
• Only 3 operational buttons for simple use

Applications:

• Hand Arm Vibration to ISO 5349 : 2001

Product Price :Get Latest Price

Product Details:

Features

• Tri-axial Hand Arm vibration Measurements
• New ‘Grip-to-measure’ Sensor
• Low Cost Seat Vibration solution
• 2 independent tri-axial measurements
• Large Dynamic Range
• Fully compliant with ISO 8041 : 2005
• Large Colour Display
• Large ‘Flash’ memory
• ‘Simple’ Mode for quick measurements

Applications

• Hand Arm Vibration to ISO 5349 : 2001
• Whole Body Vibration to ISO 2631

Product Price :Get Latest Price

Product Details:

STD-500 is an ultra-portable vibration-measuring instrument with internal spectrum analysis functions. It is used for regular machinery condition monitoring.

Highlights:

 

• Bearing condition monitoring based on high frequency enveloping
• Store up to 500 points (LF waveforms or envelop waveforms)
• Route or off-route data acquisition
• PC connection via USB for detailed analysis
• Explosion proof– ExibllBT3

Extra features:

• Bearing condition detection
• High frequency spectrum
• RMS, Peak and Peak-to-Peak to vibration measurement
• Free firmware update available via USB

Multifunctional

• From quick on-site analysis to detailed data processing on your PC including spectrum analysis, trends creation, detection of location and severity of faults, imbalance, misalignment, bed belt, soft foundation and maintaining machinery condition database.

ROUTE and OFF-ROUTE usability:

• Uploading routes from VibroDesigner Standard Analysis Software facilitates both data acquisition and creation of a unified repository for diagnostics data automatically uploaded onto your computer

Easy-to-operate:

• Only two buttons and intuitive menu make operation simple and convenient. Turn on your Data Collector. Select a Route or Off-route measurement point. Put a tip of accelerometer against the measurement point and press ENTER button. When finished, “MEASUREMENT IS COMPLETED” message is displayed on the screen. The measured value is shown, and collected waveform is saved in the memory.

Product Price :Get Latest Price

Product BrochureProduct Details:

Whole Body & Hand Arm Vibration Meter VM-31HAWB

• Hand Arm Whole-body vibration
• Acceleration, velocity and displacement ranges for machine vibration
• Display of running and interval RMS, maximum RMS (MTVV), vibration dose value (VDV), vector sum, peak and maximum peak value
• Fourth channel for SEAT measurements at driver seats
• 3-channel FFT for the detection of main frequencies
• TEDS support for automatic sensor detection
• Memory for saving measurements by keypress
• Data logger function for RMS or peak values
• USB interface for data transfer to a PC
• Excel macro for the calculation of daily exposure A(8) and report generation
• Compact design
• Simple operation

Product Price :Get Latest Price

Product BrochureProduct Details:

Whole Body Vibration Meter VM-31WB

• Whole-body vibration to ISO2631
• Acceleration, velocity and displacement ranges for machine vibration
• Display of running and interval RMS, maximum RMS (MTVV), vibration dose value (VDV), vector sum, peak and maximum peak value
• Fourth channel for SEAT measurements at driver seats
• 3-channel FFT for the detection of main frequencies
• TEDS support for automatic sensor detection
• Memory for saving measurements by keypress
• Data logger function for RMS or peak values
• USB interface for data transfer to a PC
• Excel macro for the calculation of daily exposure A (8) and report generation
• Compact design
• Simple operation

Product Price :Get Latest Price

Product Details:

Application

• VM-BODY: Measurement of whole-body vibrations in vehicles, railways, construction machines, buildings etc. to EN ISO 263
• VM-SHIP: Measurement of whole-body vibrations on board ships to ISO 6954
• Evaluation of comfort and potential health risk

Product Price :Get Latest Price

Product Details:

Application

• Measurement of hand-arm vibrations to EN ISO 5349:2001 during development and application of hand-held machine tools
• Evaluation of the potential risk of diseases in blood vessels, nerves, joints, bones and muscles

Properties

• Contains an evaluation filter type Wh to ISO 8041
• Measurement of 1, 2 or 3 axes with the possibility of evaluating not measured axes by a correction factor
• Calculation of the daily vibration exposure A(8) integrated, also for different activities, Excel export possible
• PC based measuring system using the IEPE / USB interface M302 and IEPE compatible accelerometers
• The instrument has a clone function, i.e. several program windows can be operated simultaneously with different settings
• Offline measurement with stored data
• Available as kit: *One-handle version: VM-HAND Kit One *Two-handle version: VM-HAND Kit Two

Product Price :Get Latest Price

Product Details:

Our innovative measurement system allows for vibration measurements to be taken on handheld tools thanks to autonomous sensors that do not need to be wired during measurements.

Stored data is downloaded from the sensor(s) at the end of the working period using a docking station connected to a PC. The software allows for the automatic computation and display of workers’ exposure to hand-arm vibration and indicates how such exposure compares with the limit and action values defined in the vibration Directive. In order to cover the full range of existing handheld tools, two sensors have been developed: one for usual vibrating tools while another is dedicated to highly percussive tools that generate high levels of shock (Up to 50 000 m/s²). Our measuring device that can be attached to any type of tool, is currently the only device capable of taking accurate vibration measurements without disturbing workers’ tasks with annoying and fragile cabling. A special version of the sensor is specifically designed for measurements on highly percussive tools

Features:

• Self-contained miniature sensor without wired connections
• Accurate measurement on all types of handheld tools, including highly percussive tools (up to 5000 G)
• Automatic computation of standardized exposure values
• Fully compliant with the European Vibration Directive
• User-friendly implementation and use
• Includes means of avoiding common measurement errors
• Non-intrusive
• Reasonable cost

Product Price :Get Latest Price

Product BrochureProduct Details:

The MTN/VM330D is a compact, rechargeable, portable handheld Vibration Meter designed to conform to ISO10816-3 and operate with a constant current accelerometer providing an accurate vibration measurement. Features comprise of the ability to store and transfer to PC up to 100 time-stamped readings, including; RMS, peak, peak-peak, crest factor and bearing conditions all on an easy to read vibrant colour LCD display.

Features:

• Rechargeable Lithium-ion battery with worldwide charger
• Switchable low pass filter
• User-selectable units
• High visibility colour LCD display.
• RMS, peak, peak-peak, crest factor readings in acceleration, velocity or displacement modes
• Bearing condition modes (acceleration and velocity)
• 100 memories can store vibration and time/date
• Memory data can be transferred to PC with USB cable (included)
• Industrial rubber case
• Adaptive amplifier for high accuracy
• AC output
• Audio output for listening to vibration directly
• Supplied with MTN/2200 probe sensor, others available.

Product Price :Get Latest Price

Product Details:

Features:

• High performance crisp colour LCD display
• User-selectable units
• Durable foam-lined carry case
• Adaptive amplifier for high accuracy
• AC output
• Switchable low pass filter (5kHz, 10kHz and 20kHz)
• Rechargeable Lithium-ion battery with worldwide charger
• 100 time-stamped reading memories for vibration (VM330D data downloadable)
• Bearing condition modes (acceleration and velocity)
• RMS, peak, peak-peak, crest factor readings in acceleration, velocity or displacement modes
• Audio output for listening to vibration directly
• Supplied with MTN/2200 probe sensor, others available
• Conforms to ISO10816-3

Product Price :Get Latest Price

Product Details:

The OMS LaserScan LS01 scanning vibrometer is based on a patented electro-optical configuration developed by MetroLaser. The system consists of a portable laser sensor head and electronic controller. The laser sensor head includes a laser, frequency modulator, photo-detector, color CCD camera, and two computer-controlled scanning mirrors. The electronic controller has both a demodulated velocity output and a 10.7 MHz frequency modulated signal output. The front of the controller has a signal strength indicator, two selectable velocity ranges and an array of low pass filter options. A comprehensive software package, including modal analysis, is available. The software registers the user-selected target, controls the mirrors, performs dithering if needed, collects and analyses data, and displays 2D and 3D animations.